Used for stormwater work around the yard. Full range of fittings available. Elbows, tees, sockets, pits etc.
Storm Water 90 Degree Elbows
A great stormwater pipe. Connect pipe with solvent cement. Complies with AS/NZS1254
Use these 90mm stormwater caps to close off an end of 90mm stormwater pipe. These caps are not threaded.
Connect pipe with solvent cement. Complies with AS/NZS1254.
Their versatility allows them to be used across a wide range of industries.
Ausplastics 90mm Stormwater
Is for sewer and vent use. Connect the pipe with solvent cement.
Ausplastics 45 Degree Elbows
Joins two pieces of the same size pipe at an angle of 45°. Used to re-direct the pipeline and to assist in turning corners.
P.M.X 90mm Collar
Connects and reduces 100mm to 90mm stormwater or sewer pipe to form a grate on top of the pipe. Slips over pipe and can be glued with solvent cement
90mm Slip Socket
Joins two pieces of the same size pipe. Use to extend existing pipe length or to repair a broken pipe.
90 Degree Tee Piece
Joins three pieces of the same size pipe to form a T junction. Use to re-direct the pipeline and to turn corners within an irrigation system.
45 Degree Sweep Tee
Reliably joins a branch line and a horizontal drain line.